Hello, sorry my bad english, i is newer in this fórum, i need help for solve an problem with iPXE rom, before i used gPXE rom, my computers with gigabit pci 32 card boots quickly, approx 15 seconds (normal boot), after use iPXE rom, my PCs boots on 1 minute or freeze on screen boot from drive 0x80 and my hard drive server not sync.
i have tested with pci-e cards with ipxe, my PC boots same my 32 gigabit pci cards using gPXE Rom, i have tested any cards diferente models pci 32, but no sucess with iPXE ROM.
Sorry if i have posted this topic in wrong place.
my script configurations used on gPXE and iPXE rom is same
Follow my script configuration
#!ipxe
ifopen net0
set net0/ip 10.0.0.50
set net0/netmask 255.255.255.0
set net0/gateway 0.0.0.0
set keep-san 1
sanboot iscsi:10.0.0.254:::7:iqn.device:strg-device.01
OBS. this configuration above is same on gPXE and iPXE
my board on i need configure boot lan, has no PCI-e slot
I can record the videos and post here in the forum for better understanding.
i have tested with pci-e cards with ipxe, my PC boots same my 32 gigabit pci cards using gPXE Rom, i have tested any cards diferente models pci 32, but no sucess with iPXE ROM.
Sorry if i have posted this topic in wrong place.
my script configurations used on gPXE and iPXE rom is same
Follow my script configuration
#!ipxe
ifopen net0
set net0/ip 10.0.0.50
set net0/netmask 255.255.255.0
set net0/gateway 0.0.0.0
set keep-san 1
sanboot iscsi:10.0.0.254:::7:iqn.device:strg-device.01
OBS. this configuration above is same on gPXE and iPXE
my board on i need configure boot lan, has no PCI-e slot
I can record the videos and post here in the forum for better understanding.